This article describes how to set up the Trumpia connector in your Customer Data Hub account.
In this article:
Table of Contents Placeholder
Connector Actions
Action Name |
AudienceStream |
EventStream |
Add Contact |
✓ |
✓ |
Add Contact to List |
✓ |
✓ |
Remove Contact From List |
✓ |
✓ |
Update Contact Data |
✓ |
✓ |
Delete Contact |
✓ |
✓ |
Configure Settings
Go to the Connector Marketplace and add a new connector. Read the Connector Overview article for general instructions on how to add a connector.
After adding the connector, configure the following settings:
Action Settings - Parameters and Options
Click Next or go to the Actions tab. This is where you configure connector actions.
This section describes how to set up parameters and options for each action.
Action - Add Contact
Parameters
Parameter |
Description |
List Name |
- The list to which the contact is to be added.
|
First Name |
- First name of the contact.
|
Last Name |
- Last name of the contact.
|
Email |
- Email address of the contact.
- One "tool" is required, for example, email or mobile number.
|
Country Code |
- Mobile phone number's country code.
- If left blank, then it will be assumed to be a U.S. number.
- Default value: 1.
|
Mobile Number |
- For U.S., the 10-digit number without the leading 0 or 1.
- For some international numbers, the leading 0 or 1 also must be omitted.
- No symbols or spaces.
- One "tool" is required, for example, email or mobile number.
|
Send Verificiation |
- True or false.
- If set to true, this sends a verification message to each tool before contacts are added to your distribution list.
- If the tool is not verified, it will be marked as not verified and cannot be used.
- If set to false, the verification step is bypassed and contacts will be added directly into your distribution list.
- A verification is omitted for an international phone number (not U.S.). Default value: false.
|
Custom Verification Message |
- Character limit of 60 characters.
- Default value: "Reply OK to start.
- Message and Data rates may apply.
- Upto 30 messages per month.
|
Action - Add Contact to List
Parameters
Parameter |
Description |
Contact ID |
|
List Name |
- The list to which the contact is to be added.
|
Action - Remove Contact From List
Parameters
Parameter |
Description |
Tool |
|
Tool Type |
- The list to contact information type.
- Value "
1 " = Email ; Value " 2 " = Mobile .
|
Remove All |
- True or false.
- By setting this flag to true, all other tools related to the specified tools will be deleted (the entire subscription will be deleted).
- Default value: false.
|
List Name |
- Distribution list name.
- If
remove_all is true, then the contact will be removed from the particular distribution list.
- If no distribution list is specified, then the contact will be removed from all lists.
|
Action - Update Contact Data
Parameters
Parameter |
Description |
Contact ID |
|
First Name |
- First name of the contact.
|
Last Name |
- Last name of the contact.
|
Email |
- Email address of the contact.
|
Country Code |
- Mobile phone number's country code.
- If left blank, then it will be assumed to be a U.S. number.
- Default value: 1.
|
Mobile Number |
- For U.S., the 10-digit number without the leading 0 or 1.
- For some international numbers, the leading 0 or 1 also must be omitted.
- No symbols or spaces.
|
Send Verificiation |
- True or false.
- If set to true, this sends a verification message to each tool before contacts are added to your distribution list.
- If the tool is not verified, it will be marked as not verified and cannot be used.
- If set to false, the verification step is bypassed and contacts will be added directly into your distribution list.
- A verification is omitted for an international phone number (not U.S.). Default value: false.
|
Custom Verification Message |
- Character limit of 60 characters.
- Default value: "Reply OK to start.
- Message and data rates may apply.
- Upto 30 messages per month
|
Action - Delete Contact
Parameters
Parameter |
Description |
Contact ID |
|