Back

This article describes how to set up the Trumpia connector in your Universal Data Hub account.

In this article:

Table of Contents Placeholder

Connector Actions

Action Name AudienceStream EventStream
Add Contact
Add Contact to List
Remove Contact From List
Update Contact Data
Delete Contact

Configure Settings

Go to the Connector Marketplace and add a new connector. Read the Connector Overview article for general instructions on how to add a connector.

After adding the connector, configure the following settings:

Action Settings - Parameters and Options

Click Next or go to the Actions tab. This is where you configure connector actions.

This section describes how to set up parameters and options for each action.

Action - Add Contact

Parameters

Parameter Description
List Name
  • The list to which the contact is to be added.
First Name
  • First name of the contact.
Last Name
  • Last name of the contact.
Email
  • Email address of the contact.
  • One "tool" is required, for example, email or mobile number.
Country Code
  • Mobile phone number's country code.
  • If left blank, then it will be assumed to be a U.S. number.
  • Default value: 1.
Mobile Number
  • For U.S., the 10-digit number without the leading 0 or 1.
  • For some international numbers, the leading 0 or 1 also must be omitted.
  • No symbols or spaces.
  • One "tool" is required, for example, email or mobile number.
Send Verificiation
  • True or false.
  • If set to true, this sends a verification message to each tool before contacts are added to your distribution list.
  • If the tool is not verified, it will be marked as not verified and cannot be used.
  • If set to false, the verification step is bypassed and contacts will be added directly into your distribution list.
  • A verification is omitted for an international phone number (not U.S.). Default value: false.
Custom Verification Message
  • Character limit of 60 characters.
  • Default value: "Reply OK to start.
  • Message and Data rates may apply.
  • Upto 30 messages per month.

Action - Add Contact to List

Parameters

Parameter Description
Contact ID
List Name
  • The list to which the contact is to be added.

Action - Remove Contact From List

Parameters

Parameter Description
Tool
Tool Type
  • The list to contact information type.
  • Value " 1" = Email; Value " 2" = Mobile.
Remove All
  • True or false.
  • By setting this flag to true, all other tools related to the specified tools will be deleted (the entire subscription will be deleted).
  • Default value: false.
List Name
  • Distribution list name.
  • If remove_all is true, then the contact will be removed from the particular distribution list.
  • If no distribution list is specified, then the contact will be removed from all lists.

Action - Update Contact Data

Parameters

Parameter Description
Contact ID
First Name
  • First name of the contact.
Last Name
  • Last name of the contact.
Email
  • Email address of the contact.
Country Code
  • Mobile phone number's country code.
  • If left blank, then it will be assumed to be a U.S. number.
  • Default value: 1.
Mobile Number
  • For U.S., the 10-digit number without the leading 0 or 1.
  • For some international numbers, the leading 0 or 1 also must be omitted.
  • No symbols or spaces.
Send Verificiation
  • True or false.
  • If set to true, this sends a verification message to each tool before contacts are added to your distribution list.
  • If the tool is not verified, it will be marked as not verified and cannot be used.
  • If set to false, the verification step is bypassed and contacts will be added directly into your distribution list.
  • A verification is omitted for an international phone number (not U.S.). Default value: false.
Custom Verification Message
  • Character limit of 60 characters.
  • Default value: "Reply OK to start.
  • Message and data rates may apply.
  • Upto 30 messages per month

Action - Delete Contact

Parameters

Parameter Description
Contact ID