Tealium Learning Center

lucianawp · ‎05-28-2020

Hi Bruno, Just updating this post with the information about checking the extensions (same information provided in the support ticket). In order to verify the extensions you can run this command: "utag.handler.cfg_extend". Here is an example and we can see that this command provides a list of the extensions running on the page. You will notice that the "id" parameter matches the extension UID in TiQ. It is important to note that this won't include extensions scoped to specific tags. For those, you will need to verify if the tag scoped to the extension is loading but, unfortunately, you won't be able to see them in the console. Actually, I believe this is related to the issue you mentioned at the beginning of the ticket. "However, I don't trust entirely the numbers the extension gives me because often the number of Extensions running on my profile don't match with the ones that appear on the Web Companion." Could you confirm if the extensions you do not see on the Web Companion are scoped to specific tags? If this is the case, you won't be able to see them on the Web Companion as well. Then, it is not really an issue, it is how the tool works. I would recommend submitting a product idea in our forum to improve Web Companion to also display extensions scoped to specific tags: https://community.tealiumiq.com/t5/Product-Ideas/idb-p/product-ideas. Hope this was helpful! Thanks, Luciana

lucianawp · ‎05-28-2020

Hi There, Just replying here as well with the same information provided on the support ticket :-) We don't have a robust way to do it through the console but you can use these commands to verify the tags and extensions status. Tags: You can use two commands: 1) utag.send This one will give you the list of tags loaded on the page. 2) utag.loader.cfg This other will give you the list of tags configured in TiQ. This will show all tags including those not loaded on the page, however, you can verify if they loaded checking their attribute "load". I have an example here: A) Here you see Tealium's tags loading in the Network tab. They are UIDs 10, 14 and 19. B) Here I used "utag.send" command to verify which tags loaded in the console. You can see that they match with the Network tab result. C) Finally, here, I used "utag.loader.cfg" command to verify all the tags configuration. You will notice that I have UID 1 which is defined in TiQ but not loading on the page since its load rule was not satisfied. It can be verified by "load: 0". All the other tags have "load:1" Some more information here: https://community.tealiumiq.com/t5/Tealium-iQ-Tag-Management/Deciphering-utag-loader-cfg/m-p/19504 Best, Luciana

lucianawp · ‎11-02-2017

Hi @kuzmin_sergey and @Michael_Kim_shc. I have an update on this one. Now we have documentation on this, please check the following link: https://community.tealiumiq.com/t5/Mobile-Libraries/Tealium-for-Cordova/ta-p/17618#toc-hId--19528913 And here as well https://github.com/Tealium/cordova-plugin#tagbridge-remote-commands Just as a tip, use the search term "tagbridge" instead of "tag bridge" and it will show more results.

lucianawp · ‎02-22-2017

Hi @jmartin, just to make sure I understood your request, is the 'page' parameter you are trying to map to GUA, right? This following command shows an example of this parameter being set up in a GUA tracking call. ga('send', { 'hitType': 'pageview', 'page': '/contact-us/submitted/', 'title': 'Contact Us Submitted' }); If this is what you are seeking, it is possible to map this value dynamically to our GUA tag. It is under Standard tab and it is called "Page". Please see our screenshot: In this case you can use the set data value extension to populate the virtual page variable in specific conditions and map it to the tag. Let me know in case it does not answer your question or if you need additional help. Thanks, Luciana

lucianawp · ‎02-16-2017

Hi @Michael_Kim_shc, usually on the top of the tag template you will see there is a description of what was changed - tc -, just after tv. However, in order to see these comments, you will need to update the tag, what I understand you want to do just after checking what is going to be changed. A solution is to add a new tag for the same vendor and, on Save/Publish, just SAVE it, you don't need to publish it to any environment. In this way you will be able to get the latest template and compare to your old one. You can delete this new tag after that. Hope it helps. Let me know if you have more questions. Best, Luciana

lucianawp · ‎02-09-2017

Hi @dajo_rodrigo, you are correct, the lookup table won't be able to be used in this situation in which you need to scrap the webpage, in other words, wait for DOM Ready. The option will be the javascrip extension scoped to "DOM Ready" as I mentioned before. In this extenison you will be hardcoding your static list and searching the value $('[somevalue]').text() into this list. Implementing the list and the search logic can be done in different ways. I suggest opening a ticket for us and we can have a solutions engineer helping you in this implementation. When opening the ticket please include the list you need to add and the modal code you want to display. This folllwing link will provide more information about opening a ticket: https://community.tealiumiq.com/t5/Announcements/Introducing-Tealium-Support-Desk/m-p/16342/highlight/true#M48 Let me know if you have any other questions. Best, Luciana

lucianawp · ‎02-06-2017

Hi @dajo_rodrigo, You can add a "Javascript" extension scoped to "DOM Ready" where you can read ($('[somevalue]').text() ) and check the list. In order to provide a more complete answer for you, I have a question. Where are these values from the list comming from? Are they dynamic or static values? Best, Luciana

lucianawp · ‎03-29-2016

Hi @stefano1975 currently jQuery onHandler extensions don't have the functionality to specify conditions through the interface, so you won't be able to add the URL. However, a solution is to be more specific in your jQuery selector. This following link has examples of other selectors you can use besides id/class. https://api.jquery.com/category/selectors/ For instance, if your element has a unique attribute, you can use the Attribute Word Selector [name=”value”] selector. Just as an example, let's say you have this element: <a href="//api.jquery.com/category/selectors/">Selectors</a> You can use this following attribute selector: a[href='//api.jquery.com/category/selectors/'] If another selector does not solve your problem, you can contact your account management and open a ticket in the following link. Once the ticket is opened an engineer will be assigned to help you with a more specific implementation. https://community.tealiumiq.com/t5/custom/page/page-id/support-contact-form Hope it helps!

Date Registered	‎10-09-2015 09:09 AM
Date Last Visited	‎12-04-2020 03:50 AM
Total Messages Posted	30
Total Kudos Received	5

Tealium Learning Center

Re: How can I get the exact number of Tealium tags...

Re: How can I get the exact number of Tealium tags...

Re: Hi! How to use tag bridge in cordova iOS and A...

Re: Data Mapping to Handle Dynamic Cart URLS

Re: Tag Template Version update Log

Re: Perform conditional action if a value is prese...

Re: Perform conditional action if a value is prese...

Re: Tacking ClickEvent

Products

Company